Anchor rods to tension control bolts. Made and certified.
E&A cuts, threads and bends anchor rods in Maple Grove, Minnesota, and supplies the structural bolts, nuts and washers that go with them. Send a bolt schedule or anchor bolt plan and get one quote for the whole job.
Everything that holds the steel down and together.
Anchor rods
ASTM F1554 Grade 36, 55 and 105. Headed, L-bent, J-bent, straight threaded both ends, and custom bends per drawing. Plain or hot-dip galvanized. Supplied as complete sets with heavy hex nuts and washers. Templates available.
Quote thisStructural bolts
ASTM F3125 Grade A325 and A490 heavy hex. Type 1 and Type 3 (weathering). Plain or galvanized (A325 only, A490 is never hot-dip galvanized).
Quote thisTension control bolts
ASTM F3125 Grade A325TC and A490TC (formerly F1852 and F2280), with matching nuts and washers.
Quote thisNuts and washers
ASTM A563 heavy hex (Grade DH for galvanized structural bolts, overtapped to fit), A194 2H, F436 hardened washers, plate washers for anchor rods.
Quote thisBent bolts and specials
U-bolts, eye bolts, bent bolts, headed rod and embeds made to print.
Quote thisFabricated in Minnesota. Finished to spec.
Fabricated in Maple Grove
We cut, thread and bend anchor rods and bent bolts in-house, which means short runs, odd lengths and custom bends without waiting on a mill.
Finishes
- Plain
- Hot-dip galvanized to ASTM F2329 / A153 through a qualified U.S. galvanizer
- Mechanical galvanized (ASTM B695)
- Weathering steel (Type 3)
Galvanized nuts are tapped oversize to fit galvanized threads, so order nuts and bolts together.
Certs that clear inspection
- Material Test Reports
- Galvanizing certifications
- Certificate of Conformance
- Lot traceability
- Domestic material and Buy American documentation on request
Paperwork ships with the parts, ready for your inspector or engineer.
Built for these jobs
One schedule. One quote. Complete sets.
- 1
Send the bolt schedule, anchor bolt plan, drawing or a parts list.
- 2
Get one quote with pricing and lead time for the full job.
- 3
Parts ship as complete sets, bundled and tagged by plan mark on request.
Real expectations, not marketing numbers.
Rush jobs handled case by case. Ships anywhere in the U.S., including Texas and the South.
Construction fastener questions
What is the difference between F1554 Grade 36, 55 and 105?
The number is the minimum yield strength in ksi. Grade 36 is the most common, 55 is used where higher strength is specified and is weldable with supplementary S1 requirements, and 105 is a high-strength alloy grade. Your engineer's drawings set the grade.
Can A490 bolts be galvanized?
No. A490 bolts must not be hot-dip galvanized because of the risk of hydrogen embrittlement. A325 can be galvanized.
Do you supply full anchor bolt sets?
Yes. Rods, heavy hex nuts and washers, bundled per plan mark on request.
What are tension control bolts?
Structural bolts with a spline end that shears off when the correct tension is reached, so installation can be verified visually. ASTM F3125 Grade A325TC and A490TC.
Can you help with domestic or Buy American requirements?
Yes. Domestic material and documentation are available on request. Tell us the requirement with your RFQ.
Do you ship outside Minnesota?
Yes, nationwide.
We make it. We source it. We solve it.
Send a drawing, BOM, parts list, or photo. E&A will decide whether to make it, source it, or ask for more information.